RCD And MPD Solutions Premium Oilfield Technologies is the largest provider of RCDs and MPD equipment and services in the contiguous United States. Premium’s Tru-Flow™ RCD and MPD Solutions offer the most economical and accurate Set Point Pressure Control platform in modern drilling. Tru-Flow product solutions are field proven to improve the management of downhole pressure. Our experienced team can prep and install these solutions on both land and offshore rigs, including our Sur-Tork and Tru-Flow enhancements. Tru-Flow MPD Software Cloud connected. Simple, intuitive design. Set-point,...

The inaccuracy of existing PRV systems has left the industry without adequate protection of equipment and personnel. The complexity and expense of the rebuild process on standard PRVs has created a need for more accurate PRV designs. The Premium TS-75 Digital Pressure Relief Valve delivers accurate, digital pressure relief valve at a cost close to the current mechanical systems. Accuracy and reliability allow for ultimate protection of drilling equipment and personnel Set - Trip - Peak Pressure Tracking ...

The Premium Oilfield Technologies JM 300 Top Drive Valves can be used for both blow out prevention and mud control during drilling operations. Our manually or hydraulic crank operated kelly valves are installed at each end of the kelly, or below the top drive, to control flow from the wellbore and protect surface equipment from high pressure kicks. The compact one-piece design is ideally suited where space is at a premium or where handling weight is critical. Its smooth OD allows this valve to be run anywhere in the drill string

The Caliber® well service valve and seat were designed for higher temperatures and pressures seen in today’s well service industry. The valves use our proprietary blend of urethane to ensure longer life.

Premium’s butterfly valve offers a simple and compact construction, perfect for oil and gas, agriculture, chemical/petrochemical, wastewater, and mining industries. 10 position handle (DD connection) FBE coating to inhibit corrosion P.T.F.E. stem bushings to reduce torque requirements and isolate stem for longer life Matching flanges: ANSI B16.1, EN 1092-2 Rated for up to 200 PSI Rated for 0-180°F ...

Special additive mixed with urethane to reduce friction in water Enhanced chemical degradation resistance Premium urethane compounds with higher tensile and abrasion resistance Operating temperature range 20 to 230°F Operating range 1,000 to 8,000+ psi Not affected by OBM or synthetic based muds Full compatibility with all existing stripping heads Available...